Mobile Renewable Energy Station Off Grid Energy Solutions Mobile Solar Station

OKAF mobile power supply vehicle uses photovoltaic power generation and uses solar panels to directly convert sunlight into electrical energy. The photovoltaic power generation system mainly consists of four parts: solar panels, controllers, batteries and inverters. Through intelligent and scientific management of the entire set of equipment, Save device data in real time for viewing at any time. The mobile solar energy storage vehicle is powered by solar panels, battery storage, pan/tilt system, control system, trailer frame, etc

【Functional features】

1. Providing AC 110V, 220V and DC 24V, 12V and other voltage outputs, the effective use time of the solar-based mobile power system can be greatly increased.

2. The tram is charged by eight 550W (4400W) monocrystalline silicon solar panels, with a conversion efficiency up to 21.7%, low power attenuation, and a 25-year excess linear power output guarantee. The applicable operating temperature is -45℃-+85℃, meeting various requirements. A harsh high and low temperature environment.

3. The power storage uses 18*200AH (43200wh) gel battery, which has high specific energy density, low self-discharge rate ≤2.5%/month, improved AGM separator, lower resistance, high assembly pressure to increase the life of deep cycle, Durable, 4. The discharge depth can reach 80%, the operating temperature is -40℃ - +60℃, and there is no additional cost.

5. The control system is integrated. The switches, display screens, and indicating instruments are all integrated on the same panel to facilitate the operator's factual monitoring. The 4.7-inch LCD displays real-time parameters related to PV, battery, and AC and DC loads, fault code display, and timely push of alarms. Fault information, load switch button, can control the output of AC and DC loads, and independently set the lamp switch and DC power main switch. The control system can detect the power generation voltage of the solar panel in real time and track the highest voltage and current value (VI), so that the system can charge the battery with maximum power output and has short circuit, overload, high voltage, high temperature and other functions.

【Display interface】

[Configuration details]

【Other features】

1. Easy installation: The solar lighthouse can be installed in a few minutes, providing instant security where you use it. If your installation location changes, just move it to a new location.

2. Packaging method: LCL shipping, the mobile solar lighthouse is packed in composite wooden boxes, and all spare parts of the solar lighthouse will be put into a composite wooden box. Since the solar trailer is a large product, the wooden box for packaging will be very large, and a wooden box will probably weigh more than 2860KG. In order to ensure smooth transportation, forklifts and appropriate unloading platforms are required for loading and unloading.​

3. Full container shipping: The mobile solar tower is packed on a pallet, the equipment is locked on the pallet, and the solar trailer body is protected with bubble plastic. At the same time, we will specially use pearl cotton to protect the solar panels from damage and ensure that the solar panels are properly protected.

4. Simple operation:

● The touch screen displays the operating status of the control device.

● PC remote control.

● Charging and inverter methods: solar panel charging and mains charging, inverter output 110V/220V optional.

Battery care and maintenance tips:

1. There is no need to deliberately ensure that the battery is fully discharged and recharged every time. A deep charge and discharge under the control of the protection circuit can be performed once in a period of time (recommended within 1 month) to correct the battery power statistics;

2. If the battery is not used for a long time, it should be placed in a cool place to reduce the speed of its internal purification reaction;

3. The protection circuit is also unable to monitor the self-discharge of the battery. Batteries that have not been used for a long time should be charged with a certain amount of power to prevent excessive discharge damage caused by self-discharge during storage; 4. It cannot be disassembled and modified. Things to note: 1. If the battery is not used for a long time, it needs to be stored at full charge. Recharge it once every month or so. This will help the battery life (especially important). 2. Please pay attention to fire protection, waterproof, dustproof, and keep a certain distance from flammable materials when charging.

Shenzhen Okaf Technology Co., Ltd was established in 2005. It is a high-tech enterprise specializing in researching & developing, producing and selling CCTV surveillance products. It is one of the most professional CCTV surveillance system developer & manufacturer in China nowadays.

Our main products apply to public security departments such as: vehicle PTZ Camera, 4G deployment dome camera, vehicle mobile lifter, vehicle mobile lighting devices, dynamic forensics system, highway patrol and rescue system, fire emergency rescue system, urban management law enforcement system, mobile commanding system, operation commanding system etc.

We pay much attention on developing and researching and input a lot of money in new products. The superior performance and low price of Okaf has gained many distributors’ favorable comments, thus the original markets consolidate increasingly, new markets develop constantly. The product quality has had good reputation in domestic and abroad.