Vehicle Mounted Onvif PTZ IP camera High Definition Full HD CCTV
Camera 1080P
Specification
►Support kinds of resolution IP network camera max 2.0 megapixel,
4.7~94.0mm 20x Optical zoom.
►Support IP network and analog dual video output.
►Support dual control. PTZ and camera zoom Could be controlled by
RS485 and RJ45 network.
► Built in defrosting and defogging device. Can be work well even
the temperpature change suddenly.
►Support coordinate display and angle acceptance instructions.
►Aluminum material, Shockroof, anti-corrosion. protection grade
IP66 waterproof.
► Horizontal rotation 360°, Vertical rotation -70°~+90°.
► Strong anti shaking function, Strongly anti-seismic,suitable for
kinds of police vehicle.
► Use powerful infrared IR light, nigh vision distance about
150meter.
►Vehicle power supply DC10.5V~dc18v.
►Camera with WDR 120 dB for better image.
► Local real time video viewing, remote video viewing and control.
►Support video playback by IE browser or OKAF Police Dynamic
Forensics system software.
How does OKAF Vehicle mounted PTZ camera system work?
Our vehicle CCTV PTZ IP Camera connect with 4G NVR , screen with
joystick. It could realized local real time viewing, local real
time control, playback. Remote real time viewing, remote control
and playback.
Connect way :
1. The aviation cable connect with the camera at this aviation
port. Attention the hole must be match perfectly, then plug into.
2. Another side there are RS485 wire, video wire, RJ45 wire and
power wire. The orange color wire is RS485 positive electrode, the
yellow color wire is RS485 negative electrode. Video wire and RS485
wires connect with the cable of screen with keyboard.
3. Cable of screen with keyboard another side plug into the BNC
port of the device. The power wire of the screen cable connect with
the NVR.
4. Use the provided VGA cable connect the NVR with the screen and
keyboard.
5. Get a network cable, Connect RJ45 network port with NVR network
port.
6. Connect the 4G antenna, GPS antenna.
7. Connect the power supply of the NVR.
8. Connect the power supply of the camera.Red wire is positive
electrode, black wire is negative electrode. Please do not reverse
the positive and negative poles of the power supply.
9. Finish the connection of camera, nvr and screen with joystick.
Turn on the power, the system will work.
Technical data
| Model | OK-CT130GR-20IP |
| Data of PTZ Camera | Image sensor | 1/2.8 type Exmor CMOS |
| Pixel | 2.0 Megapixel |
| Resolution | 1920*1080 |
Minimum illumination | 0.095lx(F1.6. ICR ON) |
| Lens zoom | 20X Optical zoom |
| Focus | f=4.7mm~94..0mm |
| Ajustment | white balance,automatic gain control AGC,BLC |
| SNR | ≥50 db |
| Electronic shutter | 1/1s- 1/10000s |
| control protocol | Pelco-D/Pelco-P |
| Port function | Network port | RJ45 10Base-T/100 Base-TX PoE(IEEE802.3af) |
| Hikvision,Sony,Samsung,Hitachi,and other brands HD Camera chipest |
| Network Port | RJ45 10Base-T/100 Base-TX PoE(IEEE802.3af) |
| Video | video compressor | H.264 / H.265 |
| Image pixel | 1080P 25/30P |
| Audio output | Support |
| Night vision | Lighting | Infrared light |
| vision distance | 120m |
| PTZ data | Horizontal range | 360° rotation |
| Horizontal speed | 0~120° |
| Vertical range | -90°~+90° |
| Vertical speed | 0~40°/S |
| Preset | 256 preset positions |
| Cruise | 8 pcs cruise |
| IP rate | IP66 protection |
| other feature | work temperature | -35℃~+55℃ |
| Power supply | DC10.5V~DC16V |
| weight | 7.0kg |
OKAF Police Dynamic Forensics Complete system
| Vehicle mounted PTZ Security Camera Complete System |
| |  |
Vehicle Roof mounted PTZ CCTV Camera OK-CT130GR-20IP | Vehicle NVR OK-CZ04NVR-G4DW | Sreen with Joystick OK-JP08XS |
Size of OKAF Vehicle CCTV IP camera OK-CT130GR-20IP
