Explosion Proof 4G PTZ Camera Mobile Surveillance Fast Deployment
Portable CCTV Camera
Specification
• Stainless steel housing, explosion proof.
• High definition image 1080P, 2.0 megapixel.
• Support 4G full Netcom cards, WIFI, and GPS, built-in antenna.
• High-performance H.264 and H.265 video encoding.
• Use dual TF card, maximum support 128G, larger storage capacity,
more stable network.
• Battery powered, reliable work for more than 12 hours.
• Magnet suction cup can be installed quickly and can be removed at
any time.
• Support tripod fast deployment at anywhere anytime.
• Its manufacturing meets the requirements of GB3836-2010 standard,
and adopts scientific flameproof structure to meet IIC
explosion-proof requirements.
• Perfectly compatible with Hikvision monitoring software,
supporting remote access of EZVIZ Cloud Ehome 28181
• With 1 outlet or explosion-proof plug, TPU material composite
cable output.
• Support bluetooth intercom.
Advantages of explosion proof 4G deployment PTZ camera
Exquisite and small design. Using high-strength stainless steel
material, it has the function of anti-vibration, impact resistance
and corrosion resistance. The camera has an anti-falling
design,more safety. Lithium battery power supply and strong
magnetic chassis design.Quick and easy installation.The latest
design technology can effectively prevent fogging. Equipped with
high-performance infrared light, the IR night vision distance can
reach more than 50 meters.
♥ Extensibility: The developed SDK is convenient for secondary
development.
♥ Flexibility: dual-platform access, OKAF police platform and OKAF
dynamic forensics platform.
♥ Peripheral access: support access to individual law enforcement
system, mobile squatting point 4G deployment control system, police
vehicle forensics system access.
♥ Three-proof level: waterproof, dustproof, and drop-proof,
suitable for all-weather field operations.
Technical data
| Camera model | OK-CQ60DM-IP-2-4GWG-EX |
| Explosion-proof parameters | Explosion-proof mark | Ex d IIC T6 Gb/Ex tD A21 IP67 T80℃ |
| Protection level | IP67 |
| Camera parameters | Image sensor | 1/2.8type EXmor CMOS |
| Pixel | 2.0Megapixels |
| Illuminance | 0.1 lux (F1.6, automatic gain control on, 1/30 sec)
0.008lx(ICR-ON;1/30sec) |
| Lens | f=5.1~135mm, 30x Optical zoom |
| Parameter adjustment | White balance, automatic gain control AGC, backlight compensation
BLC |
| Signal to noise ratio | ≥50db |
| Electronic shutter | 1/1 s- 1/10,000 s |
Port function | Network Interface | 10BaseT / 100BaseTX, RJ45 |
Cellular and wireless networks | 802.11a/b/g/n WCDMA, TD-SCDMA 4G LTE
|
| Network protocol | IPv4, TCP/IP, UDP, HTTP, RTP/RTCP/RTSP, FTP, UPnP, DDNS, NTP, IGMP,
ICMP |
| Video | Video compression | H.264 |
| Image Resolution | 25/30P |
| 1080P |
| Multi-stream | HD + D1 |
| Rate control mode | VBR/CBR |
| Data transmission and storage |
| Data storage | Automatic / manual recording, support TF card |
| Night vision | IR infrared light | 850nm IR light |
| Night vision distance | 60m |
| PTZ parameters | Horizontal range | 360° |
| Horizontal speed | 0-120°/S |
| Vertical range | -15°~+90° |
| Vertical speed | 0-60°/S |
| Preset position | 128 preset position |
| cruise | 8 cruises tracking |
| Pattern scanning | 3 |
| Protection grade | IP67 |
| Others | Working temperature and humidity | -35°C~+55°C ;98% |
| Power supply | DC 12.6V/ built in battery |
| Battery capacity | 11.1V 10000mAH |
| Power | 25W |
| Weight | 8KG |
